Home > Plastics > Yellow Cards > BAYER MATERIALSCIENCE PCS > 101049031 - Datasheet

Component - Plastics

File Number: E351891

BAYER MATERIALSCIENCE PCS

SEMI-FINISHED PRODUCTS, CHEMPARK BLDG B207, LEVERKUSEN 51368 DE

GP(f1), OP(f1), MG(f1), WG(f1)

Polycarbonate (PC)

UL Certification Logo
-- (f1) Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C.
-- NOTE Grade designations may be followed by letters and/or numbers indicating color.
View Complete Yellow Card Search 45901 Yellow Cards
Create Your Free Account!
Flammability
Nominal Value
Unit
Test Method
Flame Rating
     
0.0591 in, ALL
 
UL 94
0.118 in, ALL
 
UL 94
0.236 in, ALL
 
UL 94
0.0295 to 0.0551 in, ALL
 
UL 94, IEC 60695-11-10, -20
0.118 in, ALL
 
IEC 60695-11-10, -20
0.236 in, ALL
 
IEC 60695-11-10, -20
0.0591 in, ALL
 
IEC 60695-11-10, -20
Electrical
Nominal Value
Unit
Test Method
Hot-wire Ignition (HWI)
    UL 746
0.0591 in
 
 
0.118 in
 
 
0.236 in
 
 
High Amp Arc Ignition (HAI)
    UL 746
0.0591 in
 
 
0.118 in
 
 
0.236 in
 
 
Comparative Tracking Index (CTI)
 
UL 746
Dielectric Strength
V/mil
ASTM D149, IEC 60243-1
High Voltage Arc Tracking Rate (HVTR)
 
UL 746
Volume Resistivity
ohm·cm
ASTM D257, IEC 60093
Arc Resistance
 
ASTM D495
Thermal
Nominal Value
Unit
Test Method
RTI Elec
    UL 746
0.0295 to 0.0551 in
°F
 
0.0591 in
°F
 
0.118 in
°F
 
0.236 in
°F
 
RTI Imp
    UL 746
0.0295 to 0.0551 in
°F
 
0.0591 in
°F
 
0.118 in
°F
 
0.236 in
°F
 
RTI Str
    UL 746
0.0295 to 0.0551 in
°F
 
0.0591 in
°F
 
0.118 in
°F
 
0.236 in
°F
 
Physical
Nominal Value
Unit
Test Method
Dimensional Stability
%
ASTM D1042, ISO 2796
Outdoor Suitability
 
UL 746C
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.